M58MR032-ZCT データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

M58MR032-ZCT

32 Mbit (2Mb x16, Mux I/O, Dual Bank, Burst) 1.8V Supply Flash Memory

STMicroelectronics 

M58MR032C, M58MR032D

COMMON FLASH INTERFACE (CFI)

The Common Flash Interface (CFI) specification is

a JEDEC approved, standardized data structure

that can be read from the Flash memory device.

CFI allows a system software to query the flash

device to determine various electrical and timing

parameters, density information and functions

supported by the device. CFI allows the system to

easily interface to the Flash memory, to learn

about its features and parameters, enabling the

software to configure itself when necessary.

Table 17. Query Structure Overview

Tables 17, 18, 19, 20, 21, 22 and 23 show the ad-

dress used to retrieve each data. The CFI data

structure gives information on the device, such as

the sectorization, the command set and some

electrical specifications. The CFI data structure

contains also a security area; in this section, a 64

bit unique security number is written, starting at

address 81h. This area can be accessed only in

read mode and there are no ways of changing the

code after it has been written by ST. Write a read

instruction to return to Read mode (see Table 11).

Refer to the CFI Query instruction to understand

how the M58MR032 enters the CFI Query mode.

Offset

Sub-section Name

Description

00h Reserved

Reserved for algorithm-specific information

10h CFI Query Identification String

Command set ID and algorithm data offset

1Bh System Interface Information

Device timing & voltage information

27h Device Geometry Definition

Flash device layout

P

Primary Algorithm-specific Extended Query table

Additional information specific to the Primary

Algorithm (optional)

A

Alternate Algorithm-specific Extended Query table

Additional information specific to the Alternate

Algorithm (optional)

80h Security Code Area

Lock Protection Register

Unique device Number and

User Programmable OTP

Note: The Flash memory display the CFI data structure when CFI Query command is issued. In this table are listed the main sub-sections

detailed in Tables 18, 19, 20, 21, 22 and 23. Query data are always presented on the lowest order data outputs.

Table 18. CFI Query Identification String

Offset

Sub-section Name

Description

00h

0020h

Manufacturer Code

01h

88DAh

88DBh

Device Code

02h

reserved

Reserved

03h

DRC (1)

Die Revision Code

04h-0Fh

reserved

Reserved

10h

0051h

11h

0052h

Query Unique ASCII String "QRY"

12h

0059h

13h

0002h

Primary Algorithm Command Set and Control Interface ID code 16

14h

0000h

bit ID code defining a specific algorithm

15h

offset = P = 0039h

Address for Primary Algorithm extended Query table (see Table 20)

16h

0000h

17h

0000h

Alternate Vendor Command Set and Control Interface ID Code

second vendor - specified algorithm supported (note: 0000h means

18h

0000h

none exists)

19h

value = A = 0000h Address for Alternate Algorithm extended Query table

1Ah

0000h

(0000h means none exists)

Note: Query data are always presented on the lowest - order data outputs (ADQ0-ADQ7) only. ADQ8-ADQ15 are ‘0’.

1. DRC means Die Revision Code.

Value

ST

Top

Bottom

"Q"

"R"

"Y"

p = 39h

NA

NA

24/52

Share Link: