MB90560 データシートの表示（PDF） - Fujitsu
部品番号
コンポーネント説明
メーカー
MB90560 Datasheet PDF : 92 Pages
| |||
MB90560/565 Series
QFP*3
51 to 56
59
60
61
62 to 64,
1 to 3
4 to 11
12
13
14
Pin No.
LQFP*4
50 to 55
58
59
60
61 to 64,
1, 2
3 to 10
11
12
13
SDIP*5
Pin
Name
Circuit
Type*1
State/
Function
at Reset
Description
P30 to
P35
I/O ports
58 to 63 RTO0 E
to
RTO5
Event output pins for the output compare and
waveform generator output pins. The pins output
the specified waveform generated by the waveform
generator. If not using waveform generation, these
terminals enable output compare event output to
use as output compare outputs. When used as a
port, set the corresponding bits in the analog input
enable register (ADER) to “port”.
P36
I/O port
Serial data input pin for UART ch0.
2
D
SIN0
This pin is used continuously when input operation
Port is enabled for UART ch0. In this case, do not use
inputs as a general input pin.
P37
(Hi-Z) I/O port
3
D
SOT0
Serial data output pin for UART ch0.
Output operates when UART ch0 output is en-
abled.
P40
I/O port
4
D
SCK0
Serial clock I/O pin for UART ch0.
Output operates when UART ch0 clock output is
enabled.
P41 to
P46
5 to 10 PPG0 D
to
PPG5
I/O ports
Output pins for PPG ch0 to ch5.
The outputs operate when output is enabled for
PPG ch0 to ch5.
P50 to
P57
11 to 18
F
AN0 to
AN7
Analog
inputs
I/O ports
Analog input pins for the A/D converter. Input is
available when the corresponding analog input en-
able register bits are set. (ADER : bit0 to bit7)
19
AVCC
⎯
Power
supply
input
VCC power supply input pin for A/D converter.
20
AVR
G
Refer-
ence volt-
age input
Reference voltage input pin for A/D converter.
Ensure that the voltage does not exceed VCC.
Power
21
AVSS
⎯
supply VSS power supply input pin for A/D converter.
input
(Continued)
DS07-13715-5E
11
Share Link: 