µPD75212A
5.8 FIP CONTROLLER/DRIVER
The FIP controller/driver incorporated in the µPD75212A has the following functions:
• Generates the segment and digit signals by automatically reading the display data memory executing DMA
operation.
• Can select up to a total of 26 display devices in the range of 9 to 16 segments and 9 to 16 digits.
• Can apply the remaining display output as static output.
• Can adjust the brightness at 8 levels using the dimmer function.
• Can apply key scan operations.
• Generates interrupt at the key scan timing (IRQKS)
• Can generate key scan data output from the segment output pin.
• Owns the high-voltage output pin (40 V) which can directly drive the FIP.
• Segment special pins (S0 to S9) : VOD = 40 V, IOD = 3 mA
• Digit output pins (T0 to T15) : VOD = 40 V, IOD = 15 mA
• Can incorporate pull-down resistors bit-wise as mask options.
Differences between µPD75212A and µPD75238 display output function are shown in Table 5-2.
Table 5-2 Differences between µPD75212A and µPD75238 Display Output Function
High-voltage output display
Display data area
Output dual-function pin
Key scan register
µPD75212A
FIP output total : 26
Segment output : 9 to 16
Digit output
: 9 to 16
1C0H to 1FFH
S12 to S15
(PORTH)
KS0, KS1
µPD75238
FIP output total : 34
Segment output : 9 to 24
Digit output
: 9 to 16
1A0H to 1FFH
S0 to S23
(PORT10 to PORT15)
KS0 to KS2
25