Data Sheet
XE1203
5.2.2 RTParam configuration register
The detailed description of the “RTParam” register is given in the next table.
Name
Chip_config
RTParam_Bitsync
RTParam_Barker
RTParam_Rssi
RTParam_Rssir
RTParam_Fei
RTParam_Bw
RTParam_Osc
RTParam_Clout
RTParam_Stair
Bits Address
Description
0
00000 Chip configuration:
0 -> config 1
1 -> config 2
7
00001 Bit synchronizer on/off:
0 -> off
1 -> on
6
00001 BARKER on/off:
0 -> off
1 -> on
5
00001 RSSI_on/off:
0 -> off
1 -> on
4
00001 Range of the RSSI:
0 -> low range
1 -> high range
3
00001 FEI on/off
0 -> off
1-> on
2
00001 Bandwidth of the BB filter
0 -> 200 KHz (DSB)
1 -> 600 KHz (DSB)
1
00001 Source of reference frequency
0 -> internal quartz oscillator
1 -> external signal
0
00010 Enable of clkout:
0 -> no signal provided on pad clkout
1 -> signal at quartz frequency divided
by 4,8,16,or 32 provided on pad clkout
(9.75MHz down to 1.22 MHz)
7
00010 Rising and falling times in case of pre-filtering in transmitter mode:
0 -> 10 % of bit duration
1 -> 20 % of bit duration
22
D0308-214