Data Sheet
XE1203
Name
Bits Address Description
ADParam_Resxosc
4-1 01111 Selection of the value of the resistor put between TKA and
TKB in order to use a crystal operating on its third overtone
ADParam_enable_konnex 0
ADParam_Chge_thres
7
ADParam_Sync_thres
6:0
ADParam_disable_data_bidi 7
r
ADParam_Trac_thres
6-0
01111
10000
10000
10001
10001
0000 -> Resistance = 3800 KΩ
0001 -> Resistance = 2.55 KΩ
0010 -> Resistance = 4.65 KΩ
0011 -> Resistance = 1.78 KΩ
0100 -> Resistance = 8.79 KΩ
0101 -> Resistance = 2.07 KΩ
0110 -> Resistance = 3.22 KΩ
0111 -> Resistance = 1.56 KΩ
1000 -> Resistance = 16.55 KΩ
1001 -> Resistance = 2.26 KΩ
1010 -> Resistance = 3.79 KΩ
1011 -> Resistance = 1.66 KΩ
1100 -> Resistance = 6.04 KΩ
1101 -> Resistance = 1.91 KΩ
1110 -> Resistance = 2.81 KΩ
1111 -> Resistance = 1.48 KΩ
Use of the Konnex standard when using the FEI
0 -> normal mode
1 -> Konnex standard => Br = 32.7 kbps This modifies OSR
Make the sync and acquisition threshold programmable, and allow
the change of the barker code:
0 -> threshold are hard-coded and sync loss counter is 50 bits
1 -> threshold are defined by BParam_Sync_thres and
BParam_Trac_thres
Sync loss counter is variable and defined by
ADParam_Sync_loss
Threshold for sync acquisition in baker mode
Disable data bidir
0 -> Pad Data used in bidirectional mode.
1 ->Pad Data used as output and Pad datain used as input.
Threshold for tracking baker mode
Reserved
7 10010
ADParam_Sync_loss
6-0 10010 Number of bits before sync loss for barker decoding algorithm.
28
D0308-214