DME-3000 データシートの表示（PDF） - Sony Semiconductor

部品番号

コンポーネント説明

メーカー

DME-3000

Digital Multi Effects Systems

Sony Semiconductor 

SONY

The DME-7000 adds another layer of quality:

• Enhanced Interpolation — For remarkably clean effects, image

interpolation is calculated from an 8 x 8 pixel grid, one of the largest

sampling ranges in the industry. The benefit is very clear — the

greater the number of pixels sampled, the higher the interpolation

quality.

• Enhanced Filtering — Anti-alias filtering is pixel based. The

optimum parameters are calculated for each pixel according to its

position, which minimizes distortion and noise of the manipulated

image.

Dynamic Visual Effects

Second only to picture quality, a DME’s toolbox must be fully loaded with effects,

both simple and advanced. Whether the operator is re-positioning a graphic,

designing a spectacular multi-channel move, solving a visual problem, or bringing a

complex storyboard to life, a DME must have the necessary tools at hand. Sony’s

DME-series delivers, with a full range of 2-D and 3-D tools.

DME-3000 Effects

The DME-3000’s toolbox is brimming with creative effects:

• Effect File Converter — An effect file converter is provided for effect

interchangeability between DME-3000 and DME-7000 systems.

• Basic — For the basic “bread and butter” moves, 2-D and 3-D effects

such as location, compression, rotation, perspective, aspect, skew and

axis location are standard.

• Recursive Effects — With the optional BKDM-3060 board installed,

recursive effects such as film, trail, motion-decay, multi-freeze, and

strobe are provided (... music videos are not included!).

• Non Linear Effects — If your world is looking a little too “flat,” a full

range of dramatic 3-D non-linear effects and modifiers are provided

with the optional BKDM-3030 board. These include Wave, Ripple,

Broken Glass, Lens, and Panorama effects.

It is also possible to use a second video source for the backside of the

page turn, with a single channel of DME-3000 or DME-7000. This

capability requires the BKDM-3040 plus BKDM-7020, BKDM-3021,

or BKDM-3023 boards.

• Lighting Effects — With the optional BKDM-3050 board, three

realistic lighting modes are available, along with additional shading

and highlight capabilities. The lighting modes may be applied to two

light sources on the DME-3000. (Please note that Target Spotlighting

and Spotlight modes share the same light source and are mutually

exclusive.)

The first lighting mode can be applied to the image prior to

manipulation, the second can be applied after manipulation, and the

third mode can be applied downstream of the first two lighting modes.

DME-3000/7000 • Product Guide

Features and Benefits • 5

Share Link: