935267050025 データシートの表示（PDF） - Philips Electronics
部品番号
コンポーネント説明
メーカー
935267050025 Datasheet PDF : 22 Pages
| |||
Product Specification
SL1 ICS31 01
13 Electrical Specifications
Rev. 1.2
ABSOLUTE MAXIMUM RATINGS1, 2
SYMBOL
PARAMETER
Tstg Storage Temperature Range
TEST
CONDITIONS
RATING
- 55 to +140
UNIT
°C
Tj
Junction Temperature
- 55 to +140
°C
MIL-STD-883D,
VESD ESD Voltage Immunity
Imax LA-LB Maximum Input Peak Current3
Method 3015.7,
Human Body Model
±2
± 80
kVpeak
mApeak
NOTES:
1. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any conditions other than those described in the Operating Conditions and
Electrical Characteristics section of this specification is not implied.
2. This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maxima.
3. At 13.56 MHz, including current via resonance capacitor.
OPERATING CONDITIONS
SYMBOL
PARAMETER
TEST
CONDITIONS
MIN TYP1 MAX
Tamb Operating Ambient Temperature
- 25
+ 70
Tj op Operating Junction Temperature
ILA-LB Input Current2
Minimum Supply Voltage3
VLA-LB rd for READ/EAS
Minimum Supply Voltage3
VLA-LB wr for WRITE
Minimum Supply Voltage3
VLA-LB fm for READ/EAS/WRITE
fop
Operating Frequency4
Standard Mode
Standard Mode
Fast Mode
- 25
+ 85
50
± 3.1 ± 3.7
± 3.6 ± 4.1
± 5.2 ± 6.5
13.553 13.560 13.567
NOTES:
1. Typical ratings are not guaranteed. These values listed are at room temperature.
2. Including current via resonance capacitor.
3. The voltage between LA and LB is limited by the on-chip voltage limitation circuitry (corresponding to parameter ILA-LB).
4. Bandwidth limitation (±7 kHz) according to ISM band regulations.
UNIT
°C
°C
mArms
Vpeak
Vpeak
Vpeak
MHz
ELECTRICAL CHARACTERISTICS
Tamb = - 25 to +70 °C
SYMBOL
PARAMETER
Cres
Pmin
Input Capacitance between LA - LB2
Minimum Operating Supply Power3
TEST
CONDITIONS
VLA-LB = 2 Vrms
VLA-LB = 2 Vrms
Minimum Modulation of RF Voltage
mmin for Demodulator Response
m
=
Vmax - Vmin
Vmax + Vmin
mmax
Maximum Modulation of RF Voltage
for Demodulator Response
m
=
Vmax - Vmin
Vmax + Vmin
Modulation Pulse Length
tP sm of RF Voltage4
Standard Mode,
m ≥ 10 %
Modulation Start-Pulse Length
tP fm of RF Voltage4
Fast Mode,
m ≥ 10 %
tD Demodulator Response Time
m ≥ 10 %
Rmod Modulator ON Resistance
tret EEPROM Data Retention
Tamb ≤ 55 °C
nwrite EEPROM Write Endurance
NOTES:
1. Typical ratings are not guaranteed. These values listed are at room temperature.
2. Measured with an HP4285A LCR meter at 13.56 MHz.
3. Including losses in resonant capacitor and rectifier.
4. The given values are derived from the 13.56 MHz system frequency.
5. Recommended values for pulse duration generated at the read/write device.
MIN TYP1
92
97
450
10
30
3.54
5.315
15.34
0.1
50
10
100 000
17.115
0.8
115
MAX
102
14
9.44
20.06
2.4
250
UNIT
pF
µW
%
%
µs
µs
µs
Ω
Years
Cycles
July 2000
Page 15 of 22
Public
Share Link: 