ADNS-2030 データシートの表示（PDF） - Agilent Technologies, Inc

部品番号

コンポーネント説明

メーカー

ADNS-2030

Low Power Optical Mouse Sensor

Agilent Technologies, Inc 

Notes on Bypass Capacitors

• Caps for pins 7, 8 and 12, 13

MUST have trace lengths LESS

than 5 mm.

• The 0.1 µF caps must be

ceramic.

• Caps should have less than

5 nH of self inductance.

• Caps should have less than

0.2Ω of ESR.

• Surface mount parts are

recommended.

Regulatory Requirements

• Passes FCC B and worldwide

analogous emission limits when

assembled into a mouse with

unshielded cable and following

Agilent recommendations.

• Passes EN61000-4-4/IEC801-4

EFT tests when assembled

into a mouse with unshielded

cable and following Agilent

recommendations.

• UL flammability level UL94 V-0.

• Provides sufficient ESD

creepage/clearance distance to

avoid discharge up to 15kV

when assembled into a mouse

according to usage instruc-

tions above.

• For eye safety consideration,

please refer to the document,

Eye Safety Calculation AN1228

available on the web site,

http://www.agilent.com/view/

opticalnavigation.

• The 15.0 kΩ resistor is deter-

mined by the absolute maxi-

mum rating of 50 mA for the

HLMP-ED80-XXXXX. The other

resistor values for brighter bins

will guarantee sufficient

intensity with reduced power.

Absolute Maximum Ratings

Parameter

Symbol

Storage Temperature

TS

Operating Temperature

TA

Lead Solder Temp

Supply Voltage

VDD

ESD

Input Voltage

VIN

Minimum

-40

-15

-0.5

-0.5

Maximum

85

55

260

3.6

2

VDD+ 0.5

Units

°C

°C

°C

V

KV

V

Notes

For 10 seconds, 1.6 mm below seating plane

All pins, human body model MIL 883 Method 3015

All I/O pins

6

Share Link: