CS53L21
fc = 2----π----(--5----0-----k----1Ω-----)--(--1------μ----F----)- = 3.18 Hz
The MICBIAS series resistor must be selected based on the requirements of the particular microphone
used. The MICBIAS output pin is selected using the MICBIAS_SEL bit.
Software
Controls:
“Interface Control (Address 04h)” on page 43, “MIC Control (Address 05h)” on page 44.
MICBIAS
20
//
+ MICIN1
17
Σ
//
+ MICIN2
18
Figure 8. MIC Input Mix w/Common Mode Rejection
2.5 V
2.15 V
1.25 V
0.35 V
2.15 V
1.25 V
0.35 V
VA
AINxA
AINxB
Full-Scale Differential Input Level (MICMIX=1)
= (AINxA - AINxB) = 3.6 VPP = 1.27 VRMS
Figure 9. Differential Input
24
DS700PP1