Table 2-2 Signal and Package Information for the 128-Pin LQFP (Continued)
Signal
Name
Pin No.
Type
State
During
Reset
Signal Description
INDEX0
1
Schmitt
Input,
Index — Quadrature Decoder 0, INDEX input
Input
pull-up
enabled
(TA2)
Schmitt
TA2 — Timer A, Channel 2
Input/
Output
(GPIOC6)
Schmitt
Input/
Output
Port C GPIO — This GPIO pin can be individually programmed
as an input or output pin.
After reset, the default state is INDEX0.
To deactivate the internal pull-up resistor, clear bit 6 of the
GPIOC_PUR register.
HOME0
2
Schmitt
Input,
Home — Quadrature Decoder 0, HOME input
Input
pull-up
enabled
(TA3)
Schmitt
TA3 — Timer A, Channel 3
Input/
Output
(GPIOC7)
Schmitt
Input/
Output
Port C GPIO — This GPIO pin can be individually programmed
as an input or output pin.
After reset, the default state is HOME0.
To deactivate the internal pull-up resistor, clear bit 7 of the
GPIOC_PUR register.
SCLK0
124
Schmitt
Input,
SPI 0 Serial Clock — In the master mode, this pin serves as an
Input/
pull-up output, clocking slaved listeners. In slave mode, this pin serves as
Output
enabled the data clock input.
(GPIOE4)
Schmitt
Input/
Output
Port E GPIO — This GPIO pin can be individually programmed as
an input or output pin.
After reset, the default state is SCLK0.
To deactivate the internal pull-up resistor, clear bit 4 in the
GPIOE_PUR register.
56F8365 Technical Data, Rev. 7
26
Freescale Semiconductor
Preliminary