M7040N データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
M7040N Datasheet PDF : 159 Pages
| |||
M7040N
SEARCH ENGINE ARCHITECTURE
The M7040N consists of 64K x 72-bit storage cells
referred to as data bits. There is a mask cell corre-
sponding to each data cell. Figure 15 shows the
three organizations of the device based on the val-
ue of the CFG bits in the command register.
During a SEARCH operation, the search data bit
(S), data array bit (D), mask array bit (M) and the
global mask bit (G) are used in the following man-
ner to generate a match at that bit position (see
Table 16, page 29).
The entry with all matched bit positions results in a
successful search during a SEARCH operation.
In order for a successful search within a device to
make the device the local winner in the SEARCH
operation, all 72-bit positions must generate a
match for a 72-bit entry in 72-bit-configured quad-
rants, or all 144-bit positions must generate a
match for two consecutive even and odd 72-bit en-
tries in quadrants configured as 144 bits, or all
288-bit positions must generate a match for 4 con-
secutive entries aligned to 4 entry-page bound-
aries of 72-bit entries in quadrants configured as
288 bits.
An arbitration mechanism using a cascade bus de-
termines the global winning device among the lo-
cal winning devices in a SEARCH cycle. The
global winning device drives the SRAM Bus, SSV,
and the SSF signals. In case of a SEARCH failure,
the devices with the LDEV and LRAM bits set
drive(s) the SRAM Bus, SSF, and SSV signals
The M7040N device can be configured to contain
tables of different widths, even within the same
chip. Figure 16, page 29 shows a sample configu-
ration of different widths.
Data and Mask Addressing
Figure 17, page 29 shows the M7040N data array
and mask array addressing procedure.
Figure 15. M7040N Database Width Configuration
72
144
288
64 K
32 K
Masks
Data
16 K
Masks
Data
CFG = 1010101010101010
CFG = 0101010101010101
CFG = 0000000000000000
AI04669
28/159
Share Link: 